FAQs

Why is the Netgear WiFi router stops working?

You do not need to panic as your Netgear WiFi router suddenly stops working. When your router stops working then generally you need to perform the troubleshooting process. You can try turning off the wireless function and connect your laptop or computer directly with an ethernet cable. If the things still not work out for you then you can try restarting the WiFi router and check for the internet connection. Also, try rebooting the router and any modems in use. You can also contact your internet service provider. Still any problems, you should try contacting the Netgear router support.

How do I update the Netgear wireless router?

Updating the Netgear WiFi router is quite necessary to keep its functions updated. Updating the WiFi router is not much of a difficult task if the exact same steps as given in our guide which is provided on our website are being followed correctly. First, you need to open a web browser from a laptop or computer. After that you need to enter the login credentials which are neccessary to enter the home page where all the options are being displayed. Now after when yu are successfully logged in, you then need to go under the maintenance tab where you have to click on the router upgrade button. If you still have any query then you can contact Netgear router customer support.

What is Netgear error code 651?

Like every other device, the Netgear WiFi router also faces an issue of error 651. This issue generally arises when the modem report an alert and the WiFi network connection stops temporarily. A lot of users come across this type of error when they try to set up an internet connection using the PPPoE connections. To fix this Netgear error 651, you can try reconnecting your router or resetting the TCP/IP on your computer. You can also recreate the dial up connection or boot the computer in the safe mode. If you want any information or help regarding this error 651, you can contact the support team on our website through chat and email.

How do I change the admin password of the Netgear router?

Changing the Netgear router admin password is not much of a difficult task to perform if you follow the exact same steps as mentioned on our website. You must first launch an internet browser from a wireless device or a personal computer, which is connected to your WiFi router’s network. Then you should enter the login URL of the website where you need to enter the default username and the password. After the home page displays, you need to go to the admin tab and there you can set the new password. Finally, click the apply button. If you require further information then you can contact our support team.

How do I setup the Telkom D Link router?

To access the Telkom D Link router, you need to follow the Telkom D Link router guide available on our website. We have made the guide in such a way so that while accessing or logging into the Telkom D Link router you should not face any type of difficulty. You need to have a computer with working internet connection and an internet browser where you need to enter the default IP address and then perform the login procedure. In the login procedure guide, you will be provided with the complete username and the password so that you should not face any particular issue while logging in the D-Link Wireless Router or to access it. You can choose from the maintenance tab, access control tab, account password tab and many more.

How do I access the D Link router settings?

To access the D Link router settings, you need to refer the login guide for the D Link router on our website. You need to have a computer with a working internet connection and an internet browser where you need to enter the default IP address and then perform the login procedure. In the login procedure guide, you will be provided with the complete username and the password so that you should not face any particular issue while logging in the D-Link Wireless Router or to access it.

How to secure your Netgear Wi-fi router?

Cybercrime is real. In today’s world, there are entire organizations that target not only big business but also can breach data out of your home network. So, securing your wi-fi router and network associated with it is very important. Good news is that it is possible by just following simple steps discussed below:

  1. Own a NETGEAR Router- NETGEAR Routers at its initial level have some security configurations which save your network from attacks.
  2. Always configure Firewall: Firewall is the first line of defense. The firewall sits in between your private network and public network. Depending upon firewall’s configuration, it can save your network from any type of attacks. NETGEAR routers have the pre-configured firewall.
  3. Guest Network Access: By default, many routers have guest access turned on, which allows anyone who knows the preconfigured password direct access to the network. Always disable Guest Network Access to protect your network. Luckily NETGEAR Router has pre-configured disabled guest network access.
  4. Remote Administration: Remote administration is the devil and unless you are prepared to constantly monitor your network to make sure that you’ve not been hacked, you need to leave it off. Remote administration is exactly what the name implies. It allows someone to administer your router over the internet without being directly connected to your network. There is obviously some security involved but an experienced hacker can get through it. So just leave it off and configure your network when you’re at home.

It looks easy for the technical person, but for the non-technical background it could be a big task and situation may arise that they can’t configure these settings. In that case, they can contact their manufacturer directly or can get Support for Netgear Router by connecting with us through chat at www.router-loginnet.com.

How to protect your NETGEAR wireless network password?

By default, password protection is disabled on every new NETGEAR ROUTER which can help attackers to attack into our network. In order to protect your password using WPA you can follow below-mentioned steps:

    1. Visit www.routerlogin.com or www.routerlogin.net using any of the available Web browsers.
    2. You will be prompted to NETGEAR Router Setup Window.
  • Type username as admin and password as password but remember these credentials are case-sensitive.
  • Visit ‘Wireless settings’ on the left of setup window.
  • Type username and password again.
  1. Search for security settings out there and click on WPA-PSK radio button.
  2. Under Security encryption select passphrase.
  3. Enter passphrase value that could be any of two available:
  4. The passphrase may either be a string of 64 hexadecimal digits.
  5. Word/phrase of 8-63 each ASCII character.
  6. Keep a note of these settings for further references.
  7. Apply changes.

This is one of the security applications you can use. WEP is another method, which is discussed below:

  1. Visit www.routerlogin.com or www.routerlogin.net using any of the available Web browsers.
  2. Type username as admin and password as password but remember these credentials are case-sensitive.
  3. Search for Wireless Settings under Setup.
  4. Under Security Options, select WEP (Wired Equivalent Privacy).
  5. From Security Encryption (WEP) > Authentication Type, select Automatic.
  6. From Security Encryption (WEP) > Encryption Strength, select 64-bit or 128-bit

Note:  You will need to configure your wireless computers with the same setting.

  1. From Security Encryption (WEP) Key, select Key 1 and enter a key.
  2. WEP keys are entered in hexadecimal digits, which are any combination of 0-9, A-F.
  3. If you select 64-bit under Security Encryption (WEP) > Encryption Strength, then enter 10 hexadecimal digits for your key.
  4. If you select 128-bit under Security Encryption (WEP) > Encryption Strength, then enter 26 hexadecimal digits for your key.
  5. Save or keep a note of these values. They will be required to connect wirelessly to your network
  6. Apply changes.

These settings remain the same for every Netgear Internet Router. Always remember that you can enable or configure any one of these two-security encryption level (WPA, WEP)

It looks easy for a technical person, but for the non-technical background, it could be a big task and situation may arise that they can’t configure these settings. In that case, they can contact their manufacturer directly or can get Support for Netgear Router by connecting with us through chat at www.router-loginnet.com.

How to extend Wi-Fi coverage in your home?

There are multiple ways to make it possible:

  1. Extending the network.
  2. Upgrade your router.
  3. Using Home plug Adapters.
  4. Using a wireless Repeater or Range Extender.

Using wireless Repeaters or Range extenders is a very effective method to extend your Wi-Fi coverage.

Wireless Repeaters are a Wi-Fi booster which receives existing signal and boost it before retransmitting. Router extenders increment the inclusion scope of your web and additionally grows its quality in non-inclusion zones by interweaving to routers remotely. A repeater utilizes a large portion of its interior receiving antennas to get a wireless signal and the other half to transmit boosted signal – adequately dividing the potential speed of the original Wi-Fi signal. Extenders transform into an Internet access points. Once introduced, you can associate all your hardware with it.

There are multiple extenders available but Netgear Range Extender AC2200 series is one of the best available in the market today. Once, you have the item in your insight, the following stage is to setup/introduce that gadget for your utilization.

How to hide Netgear wireless SSID?

By default, SSID broadcast is enabled on any new NETGEAR Router. In order to increase your network security, you can hide SSID by following below steps:
1. Open any of your device compatible web browser.
2. Type URL www.routerlogin.com or www.routerlogin.net, which will redirect you to NETGEAR Router setup window.
3. Type username as admin and password as password.
NOTE: These credentials are case- sensitive.
4. Select Wireless under the BASIC tab.
5. Disable/Unmark the Enable SSID broadcast checkbox.
6. Apply changes.
These Multiple steps will be same for all NETGEAR Internet Routers.
It looks simple, but for any non-technical background it may not be that easy to configure these steps on NETGEAR Router. In that case, you can contact your brand manufacturer or you can chat with us at www.router-loginnet.com for Netgear Tech Support .